Before Departure:
Before transport, we advise that you
prepare to ensure a trouble free trip.
We advise to carry out the following
list, or if needed book our services to complete the list
on your behalf.
1) Disconnect/Isolate batteries.
2) Check and turn off all water and fuel tank valves.
3) Remove any flammable substances - paints, thinners
etc...
4) Close and secure all windows and hatches.
5) Close drawers and cupboards.
6) Store and/or secure all loose items. (Internal/External)
7) Remove and store ropes, fenders, life-rings etc.
8) Remove canopies.
9) Lower or remove any antennas or radar arches.
10) Tilt up outdrive units for loading.
11) Mast rigging and cabling must be removed or securely
attached to the mast. Any wind instruments/Nav lights
must be removed. Bottle screws should all be removed and
stored safely on board.
If you require to book our services to
carry out this list, please advise us at the time of booking,
this will ensure we have the necessary equipment to do
so. Failure to carry out this list may mean that the boat
transport is delayed. Masts and rigging must be fully
prepared for transport. This is usually carried out when
the mast is removed. We will ensure the mast is secure
on the boat or if placed on the trailer, but any ancillary
parts, spreaders, and rigging will need to be secured.
Removal of Navigation lamps, wind indicators or VHF antennas
is also recommended.
For boats travelling to
or from France/Spain, we will require the original documents
for the vessel, which we will also photocopy (for customs
purposes). These documents are; Registration
papers or SSR certificate. For boats travelling to or
from France/Spain, we will require the original documents
for the vessel, which we will also photocopy (for customs
purposes).